17
18
Performance Quailty Features Automation Dimensions
Specifications
Stations
Indexing drive
Indexing speed
Accuracy
OD tool shank size
ID tool shank size
340 mm ( 13.38" )
12
6*4 [ 12*5 ]
AC 1.2 kW ( 1.6 HP )*4
AC 2.7 kW ( 3.6 HP )*5
7 N-m ( 5 ft-lbs. ) [ Cont. ]*4 [ 12 N-m ( 8.9 ft-lbs. )*5 ]
Fanuc AC Servo motor
0.2 sec. Adjacent / 0.5 sec. 180 degrees ( Single step )
□
20 mm (
□
3/4" )
Ø 25 mm ( Ø 1" )
1 ~ 13 mm ( 0.04" ~ 0.51" ) ER 20 collets*4 [ 1 ~ 16 mm ( 0.04" ~ 0.63" ) ER 25 collets*5 ]
10 ~ 4,400 RPM*4 [ 10 ~ 4,000 RPM*5 ]
Max. turning diameter
Max. X-axis travel
Max. Y-axis travel
X / Y axes rapids
Slide way type
Feed rates
X-axis servo motor
Y-axis servo motor
X-axis ball screw Ø / pitch
Y-axis ball screw Ø / pitch
X / Y axes thrust ( Cont. )
280 mm ( Ø 11.02" )
195 mm ( 7.67" )
70 mm = ± 35 mm ( 2.75" = ± 1.37" )
24 m/min. ( 945 IPM ) / 10 m/min. ( 393 IPM )
Linear Guide Way
1 ~ 4,800 mm/min. ( 1 ~ 189 IPM )
AC 2.7 kW ( 3.6 HP )
AC 2.7 kW ( 3.6 HP )
Ø 32 mm ( 1.26" ) / Pitch 6
Ø 32 mm ( 1.26" ) / Pitch 6
1,282 Kg ( 2,820 lbs. )
Quill center taper
Quill diameter / travel
Tail stock base travel
Programmable quill / base
Programmable base type
MT#4 ( Live center required. )
Ø 70 mm ( 2.75" ) / 150 mm ( 5.90" )
290 mm ( 11.41" )
Yes / No
Hydraulic moto + Guide way [ Servo motor + Ball screw ( Upon request )]
TURRET
GENERAL
Repeatability on X-axis
Repeatability on Z-axis
Standard CNC control
Voltage / Power requirement
Hydraulic tank capacity
Coolant tank capacity
Coolant pump
Machine weight
Machine weight ( Y models )
Dimensions L × W × H
LIVE TOOLING TURRET ( OPTIONAL )
Y-AXIS ( OPTIONAL )
TAILSTOCK
GLS-150
10 / 12
Fanuc AC Servo motor
0.2 sec. Adjacent / 0.5 sec. 180 degrees ( Single step )
Positioning : ± 0.00069°, Repeatability: ± 0.00027°
□
25 mm (
□
1" )
Ø 40 mm ( Ø 1-1/2" )
± 0.002 mm
± 0.002 mm
Fanuc O
i
-TD
AC 200 / 220 +10% to -15% 3 phase / 20 KVA
50 L ( 11gal. )
100 L ( 22 gal. )
0.5 kW ( 3/4 HP , 60 Hz ) rated at 3 bar ( 43.5 PSI )
3,200 Kg ( 7,040 lbs. )
3,500 Kg ( 7,700 lbs. )
Machine : 2,450 x 1,645 x 1,675 mm ( 96.4" x 64.7" x 65.9" )
Machine w/Y-axis : 2,480 x 1,655x 2,060 mm ( 97.6" x 65.1" x 81.1" )
Max. turning length
Stations
Live tooling stations
Live tooling drive motor
Live tooling torque
Indexing drive type
Index speed
OD tool shank size
ID tool shank size
Live tooling shank size
Live tooling RPM range
GLS-260
GLS-200
Specifications are subject to change without notice.
*4 Live tooling tools rotate together.
*5 Live tooling tools rotate in working position only.
