13
14
Model
Bar diameters
Maximum bar lengths*¹
Magazine capacity
Control / drive type
Foot print
Weight
BF-65
5 ~ 65 mm ( 0.19”~2.55” )
1,220 mm ( 48” )
65 mm ( 2.55” ) x10 bars
MITSUBISHI / Pneumatic
L 63” x D 44”
250 Kg ( 550 lb )
BF-80
6 ~ 80 mm ( 0.23”~3.14” )
1,525 mm ( 60” )
80 mm ( 3.14” ) x 7 bars
MITSUBISHI / Servo
L 87” x D 57”
500 Kg ( 1,100 lb )
Bar Feeder
Actual bar length limited by total s work-piece length ( work-piece + chuck + s cy
rear spindle cover lengths ). A bar supporting device must be used if bar extends past the rear spindle
cover, otherwise, the bar may bend during machining causing serious machine damage and injury or
death to operator.
Cut off
Feed new bar
into spindle
New bar feed
against turret stop
Pushing forward
Last piece cut off
Machining
Remnant eject
Bar Feeding & Bar Change Cycle
Optional hydraulic parts catchers can be programmed to catch
finished parts after cut-off. Parts conveyor systems are also available.
Parts Conveyor
Parts Catchers
Performance Quailty Features
Automation
Dimensions Specifications
*1
