9
CHAPTER 4 – ENTERING A DESTINATION
The GNAV20 goes through a test cycle when it is first powered up, or whenever power is cycled. During
this time the Goodmans logo is displayed. Data can be entered to the GNAV20 by pushing the buttons on
the display unit or the small Remote.
The Main Menu
– The main menu screen is displayed when the system is ready. From this screen all
system controls and functions can be accessed.
The Entries in the Main Menu
are:
o
Previous Destinations
o
Settings
o
Address
o
Address Book
o
Place
o
Where Am I?
10
ADDRESSES
To navigate to an address, use the SCROLL WHEEL to highlight the ADDRESS option and press the
ENTER key to select.
Entering City Name
– You need to first enter the City
Name. The GNAV20 keeps the names of the most recent
ten (10) cities visited in memory. You can use the
SCROLL WHEEL to move up and down through the list
to select the city or enter a new one.
To enter the name, use the SCROLL WHEEL or
UP/DOWN Buttons on the Remote to scroll through the
letters, when the desired letter is highlighted, push the
ENTER key and the letter will appear on the bottom of
the screen. If a letter is selected by mistake, use the
LEFT/RIGHT Arrow to highlight the BACK symbol
then push ENTER to move back one space. The
GNAV20 has a spell-ahead feature, which eliminates
letters as you enter the name. You can select the LIST
box and see the list of available names, or once enough
letters are entered to eliminate the list to ten or fewer
names, the system will jump to a list screen
automatically. Select the City Name and push ENTER.