29
CHAPTER 10 - DRIVING DIRECTIONS AND VOICE COMMANDS
The driving instruction under Voice Mode works the same as in non-voice mode; the guidance is given by
both voice and graphic screens.
Requesting Information
– After you have entered your destination you can query the GNAV20 for
information anytime during your trip. Here is a list of command words, along with a brief explanation of
their function:
Command Explanation
Navigator
(
beep
)
Turn
Distance to your next turn, and the direction of the turn.
Navigator
(
beep
)
Distance
Remaining distance to your destination.
Navigator
(
beep
)
Direction
Announces your direction of travel.
Navigator
(
beep
)
Repeat
Repeats a driving instruction.
Navigator
(
beep
)
Trip
A summary of the remaining roads you will take.
Navigator
(
beep
)
Next
To hear the next leg of the route. You can manually “scroll”
through your route by repeating this command.
Navigator
(
beep
)
Previous
To hear the previous leg of the route.
Navigator
(beep)
Help
Gives a list of command words, and allows you to turn on the
training mode.
Navigator
(beep)
Where am I
Announces your current location.
Navigator
(
beep
)
Stop
To end the route and put the GNAV20 in the standby mode.
30
CHAPTER 11 – CHANGING THE SETTINGS BY VOICE
Settings Menu
- After you have put the GNAV20 in the standby mode by saying "
stop
" or "
navigator
(
beep
)
stop
", you may say "
navigator
(
beep
)
settings
" to change the default settings.
When you enter the settings menu the GNAV20 will start listing options, and you can respond by saying
“
yes
”, “
no
”, or “
previous
” to move through the list of menu options. The “
previous
” command is
helpful when you accidentally select a menu option and want to exit from that choice, as it moves you
back through the menu one step at a time. To move forward through the menu options you should say
“
no
” until you reach the desired menu item.
Here is a summary of all the options available in the settings menu:
Address Book
– If you chose to add locations to the address book, the GNAV20 will ask you to enter the
street number, street name, and a custom name. These addresses will reside in your address book for
quick recall at any time.
You can also remove locations from the address book, either one at a time or all the addresses at the same
time. When removing only one address, the GNAV20 will display the address on the screen for
verification after you spell the custom name.
When removing all the listings from the address book, the GNAV20 will ask “
Are you sure you want to
remove all the listings?
” If you answer “
yes
” the all the listing will be removed, and they will not be able
to be recovered. If you answer “
no
”, the GNAV20 will ask you to spell the custom name of the address
book entry that you would like to remove. At this point you can either spell the custom name or say
“
stop
” and the GNAV20 will allow you to quit and exit the settings menu.