This appliance may be fitted with a non-rewirable plug. If you need to change the fuse in a non-
rewirable plug, the fuse cover must be refitted. If the fuse cover is lost or damaged, the plug must
not be used until a replacement is obtained (available from the appliance manufacturer). It is
important that the colour of the replacement fuse cover matches the colour marking on the base of
the plug.
n
n
If the plug has to be changed because it is not suitable for your socket, or becomes damaged, it
should be cut off and an appropriate plug fitted following the wiring instructions. The plug removed
must be disposed of safely as insertion into a mains socket is likely to cause an electrical hazard.
2. CONNECTING TO POWER
For your own safety read the following instructions carefully before attempting to connect this unit
to the mains.
You should only plug the appliance into a 230V AC, 50 Hz supply. Connecting it to other power
sources may damage the appliance.
The wires in this mains lead are coloured in accordance with the following code:
BLUE = NEUTRAL
BROWN = LIVE
I
MPORTANT
The colours of the wires in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
The blue wire must be connected to the terminal
marked with the letter N or coloured black.
If a 13 Amp (BS1363) plug is used, a 3 Amp fuse must be fitted, or if any other type of plug is used a 3
Amp fuse must be fitted, either in the plug, adaptor, or on the distribution board.
Caution
To prevent electric shock disconnect from the mains before removing the cover.
This symbol means that this unit is double insulated. An earth connection is not required.
The brown wire must be connected to the
terminal marked with the letter L or coloured
red.
No connection should be made to the earth
terminal.
n
n
n
Page 3
