32
D
VD+R /R
W
Re
cor
de
r
RW
DD
4-1
Troubleshooting Guide
No power.
n
Is the power cord firmly plugged into the power outlet?
n
One of the safety mechanisms may be operating. In this event,
unplug the player from the power outlet briefly and then plug it in
again.
No picture.
n
Check that the system is connected securely.
n
The video connecting cord is damaged. Replace it with a new
one.
n
Make sure you connect the system to the video input connector
on the TV.
n
Make sure you turn on the TV.
n
Make sure you select the video input on the TV so that you can
view the pictures from this system.
Noise(interference) appears in the picture.
n
Clean the disc.
n
If video from this system has to go through your VCR to get to
your TV, the copy-protection applied to some DVD programs
could affect picture quality. If you still experience problems after
checking your connections, please try connecting your DVD
system directly to your TV S-Video input, if your TV is equipped
with this input.
The aspect ratio of the screen cannot be ch-
anged even though you set "TV Type" in the
Video menu when you play a wide picture.
n
The aspect rate is fixed on your DVD disc.
n
If you connect the system with the S-Video cable, connect dire-
ctly to the TV. Otherwise, you may not change the aspect rate.
n
Depending on the TV, you may not be able to change the aspect
ratio.
The remote does not function.
n
Remove any obstacles between the remote control and the
system.
n
Move the remote control closer to the system.
n
Point the remote control at the remote sensor on the front panel.
n
Replace all the batteries in the remote control with new ones if
they are weak.
n
Check that the batteries are loaded correctly.
If you experience any of the following difficulties while using the system, use this troubleshooting guide to
help you remedy the problem. While any problem persist, consult your nearest service center.
