Goodmans GDB01SFV1, Руководство пользователя

Страница: 15 / 21

GDB01SFV1
OSD Settings
OSD . Use the / (O, 06) buttons to cycle through various
coloured versions of the graphic interface.
OSD Timeout . Sets the duration the On-Screen display stays
visible for when not in use. The default is 6 seconds.
Use the / (O, 06) buttons to cycle through the options 1-6
seconds.
OSD Trans . Controls the translucency of the interface. Use
the / (O, 06) buttons to cycle through the options 10% -
60%.
OSD Language, Audio Language & Subtitle Language .
Use the / (O, 06) buttons to enter the language selection
options. Then use the / (N, P) buttons to select the
language you require from English, Gaelic or Welsh. Press the
ENTER (05) button to store the setting.
TV Settings
Aspect Ratio . This setting controls how the picture fits the
screen depending on the TV used. Press the / (O, 06)
buttons to cycle through 16:9, 4:3LB (letter box) or 4:3PS (Pan
& Scan).
Video Output . Press the / (O, 06) buttons to cycle through
the two options of RGB or CVBS depending on what signal
your TV requires.
Brightness . Use the / (O, 06) buttons to enter the
Brightness level options. Then use the / (N, P) buttons to
select from 0% to 100%. Press ENTER (05) to apply the
brightness level setting
Contrast . Use the / (O, 06) buttons to enter the Contrast
level options. Then use the / (N, P) buttons to select from
0% to 100%. Press ENTER (05) to apply the contrast level
setting.
Hue . Use the / (O, 06) buttons to enter the Hue level
options. Then use the / (N, P) buttons to select from -6 to
+6. Press ENTER (05) to apply the hue level.
Saturation . Use the / (O, 06) buttons to enter the
Saturation level options. Then use the / (N, P) buttons to
select from 0 to 12. Press ENTER (05) to apply the saturation
level setting.
5.1
5.2
Configuration 5
Group
CH- CH+ VOL-
ENTER
VOL+
Group
CH- CH+ VOL-
ENTER
VOL+
Group
CH- CH+ VOL-
ENTER
VOL+
To configure the following settings press the MENU (L)
button and select DIGITAL TV. From the following options
use the / (O, Q) buttons to select CONFIGURATION.