18
Setting the Alarms
06
Setting The Alarms
You can set two completely separate
alarm times (ALARM 1 and ALARM 2)
and activate either or both of them to
wake you with a buzzer or radio.
The alarms are set from within the
‘Alarm’ option of the Settings Menu.
DON’T FORGET!
You must complete all the settings
before leaving the menu or your
changes will not be saved.
Set the alarm as follows:
DON’T FORGET!
Alarm settings cannot be changed
when set to Standby.
1. Switch on the radio.
Press the
2.
ALARM
button on front
panel.
‘Alarm Status Set’ will appear on
3.
the display.
Press the
4.
SELECT
button (
NOT
‘SELECT Control’) to begin setting
Alarm 1, or
Press the button before selecting to
choose Alarm 2 setup.
Alarm 1 Wizard is now displayed.
5.
The alarm is now to be set in the
6.
sequence shown right.
To make a change to a setting:
Press the
1.
or
Button to scroll
through the options available for
a setting (or times when clock
setting).
When you have finished changing a
2.
setting, press the
SELECT
button to
confirm the setting and move to the
next setting in the sequence.
Repeat the previous two steps to
3.
change each setting as required.
When changing the Alarm radio preset
setting, wake to the last station you
played before setting the radio to
Standby.
Saving the alarm settings
Your alarm settings are automatically
saved when you complete the last
setting and press the ‘SELECT control’.
DON’T FORGET!
Press the
MENU
Button at any time
to exit alarm setting, leaving the
settings unchanged.
Alarm 1 On/Off
Choose to set Alarm 1 On or off
Alarm 1 Time
Set the alarm hours, then minutes
Alarm 1 Duration
Set the duration of the alarm
Alarm 1 wake-up mode(Source)
Choose from DAB+,FM,iPod,Buzzer
Alarm 1 Volume
Set the volume for Alarm 1
Alarm Saved
The alarm settings have been saved
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
