14
Choose the ‘System’ menu option to
open the sub-menu of system options
shown on the menu map.
Details of the DAb Settings Menu
Autoscan:
Select Autoscan to re-scan
the entire DAB band and refresh the
station list.
Manual Tuning:
Manual tuning
enables you to search the band
manually by pressing the or button to
step through the multiplex numbers and
check if any have usable signal strength
on a bargraph display. Manual tuning
is not necessary in normal operation
where scanning will have automatically
established a station list of all usable
stations.
More details of the System
Sub-menu options:
Sleep:
Select this option to set a sleep
time in the range 15-90 minutes. When
a sleep time is set, the radio will set To
Standby after the sleep delay time.
Choose ‘Sleep Off’ to cancel sleep
mode.
Alarm:
Select this option to set alarm
times and activate one or both of the
dual alarms.
More details of alarm setting in the
‘Using Alarms’ section.
Time:
Select the Time option to set the
clock manually. This may be useful if you
are in an area where it is not possible to
receive digital radio broadcasts.
Within the Time menu options you
can change the clock display format
between 12 and 24 hour, choose
whether the clock should set from the
DAB time signal (Auto update) and to
change the format of the time and date
display.
Display Setting:
Select “Display set”
then the “Active Backlight” sub-option
to change the backlight brightness.
Press
1.
or
to adjust the
brightness level.
Press SELECT to enter the Standby
2.
Backlight sub-option.
Press
3.
or
to adjust the
brightness level during Standby
Mode.
Factory Reset:
Select the ‘Yes’ sub-
option to reset all the settings of your
radio to the original factory settings.
The station list will also be cleared and
any stored preset memories will be
erased.
After a factory reset the radio will re-
scan the band and renew the station
list.
Using DAb
04
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
