P. 18
TROUBLE SHOOTING
The following indicator appears.
E1, E2, E3
Press the RESET button.
If this indicator still appears after pressing the RESET button, consult
your nearest service dealer.
BEFORE SET REMOVAL
1
Take out the disc.
If a disc remains in the CD player,
the disc or set may be seriously
damaged in transportation.
2
Turn off the power switch.
CAUTION:
Metal parts of this unit (especially on the back) become quite hot during operation,
be careful to avoid touching parts immediately after removing the unit.
Goodmans Product Information Helpline (0870) 873 0080
TROUBLE SHOOTING
The following checks will assist in the correction of most problems which you may
encounter with your unit. Should any problem persist after you have made these
checks consult your nearest service dealer.
Before going through the check list first refer back to the connection and operating
procedures.
Symptom
Cause
Solution
No power.
The car’s ignition switch is not
If the power supply is connected to
on.
the car’s accessory circuits, switch
the ignition key to “ACC”. (usually the
first position)
The fuse is blown.
Replace the fuse with another 5A or
0.5A fuse.
Disc will
You are trying to put in the
Insert the compact disc with the label
not play.
compact disc up-side down.
side facing up.
The compact disc is extremely
Clean the compact disc, try to play
dirty or defective disc.
a new one.
The temperature in the car is
Cool off the inside of the car, then try
too high.
again.
Condensation.
Leave the disc player off for an hour
or so, then try again.