7
7.SETTING THE CLOCK
To set the correct "TIME":
1. Press the “CLOCK ADJUST/12/24
HOUR” for 2 seconds to adjust 12 hour
or 24-hour.(F1)
2. Press and hold the " CLOCK ADJUST
12/24 HOUR” button once, the
"HOUR and MIN DISPLAY" will flash.
3. Press the “
" and “
” buttons until the correct time is
shown on the display.(F2)
4. Press the “CLOCK ADJUST12/24
HOUR" button once again to confirm
the correct time and the“HOUR and
MIN DISPLAY” will not flash.(F3)
Note:
MIN/SKIP/SEARCH DOWN
(I<<)
HOUR/SKIP/SEARCH UP
(>>I)
1. You can also press the
"STOP/CLO-ADJ. BUTTON" on
the remote control to adjust
the clock operation.
2. During in the CD mode. Press the
"CD DISPLAY" button once on the
unit, the clock display will change
into current track number, and
then it will return to the clock
display in a few seconds
Automatically.
8.ALARM FUNCTION
Press the "FUNCTION" selector button to RADIO, CD or Buzzer to make the desire ALARM
mode status.
T
o set the correct "ALARM 1" :
1. Press the "ALARM 1" button once on the unit. The “ALARM 1 LED INDICATOR" will light
on and the "HOUR & MINUTE LED INDICATOR" will flash too.
2. Press the “
" and “
”
buttons to adjust the correct alarm time.
3. Press the "ALARM 1" button once again to confirm the "ALARM 1" function, the "HOUR &
MINUTE LED INDICATOR" will become to "CLOCK" display at once and the “ALARM 1
LED INDICATOR" will still light on the LED display.
To set the correct "ALARM 2" :
1. Press the "ALARM 2" button once on the unit. The “ALARM 2 LED INDICATOR" will light
on and the "HOUR & MINUTE LED INDICATOR" will flash too.
2. Press the “
" and “
”
buttons to adjust the correct alarm time.
3. Press the "ALARM 2" button once again to confirm the "ALARM 2" function, the "HOUR
& MINUTE LED INDICATOR" will become to "CLOCK" display at once and the
“ALARM 2 LED INDICATOR" will still light on the LED display.
MIN/SKIP/SEARCH DOWN (I<<)
HOUR/SKIP/SEARCH UP (>>I)
MIN/SKIP/SEARCH DOWN (I<<)
HOUR/SKIP/SEARCH UP (>>I)
F1
F2
F3
