background image

10.DISPLAY HIGH / LOW DIMMER

9.WAKE UP TO RADIO, CD&ALARM

8

Press the "DIMMER" button to HIGH or LOW on the rear of the unit.

11.FUNCTION OPERATION

Select the UNIT FUNCTION by pressing the FUNCTION button repeatedly in STANDBY or 

POWER ON mode.

1.  Press the FUNCTION button once, the function indicator will light on in red colour and    

     the CD or ALARM mode will be on. 

2.  Press the FUNCTION button twice, the function indicator will light on in green colour 

     and the FM radio or ALARM mode will be on.

3.  Press the FUNCTION button thrice, the function indicator will light on in orange colour 

     and the AM radio or ALARM mode will be on.  

4.  Press the FUNCTION button repeatedly, the function indicator will light off and the  

     ALARM BUZZER mode will be on only.

     

12.RADIO OPERATION

1. ALARM 1 and 2 are independent from Each other and can be individually set to wake to 

    MUSIC (CD/RADIO) or BUZZER.

2. If wake to MUSIC is used then ensure that the correct volume is set before setting the 

    ALARM 1 and 2. Also ensure that a CD disc is inserted if CD function is selected and that 

    the radio is tuned to a station if Radio is selected.

Press the FUNCTION button to RADIO mode.

MW

Turn the TUNING control to select the required 

station. For operation on MW the set control a built-in ferrite aerial which is directional. 

Therefore, the set should be positioned for the best signal strength. 

FM

Turn the TUNING control to select the required station. 

Fully extend the FM antenna wire

and adjust its direction for the best FM reception. The STEREO/RANDOM LED INDICATOR

 will light on the front panel of this unit. 

13.CD OPERATION

Press the STANDBY/AL. OFF button to switch on the set. Press the "FUNCTION" button to 

CD. Open the CD door. Insert the Compact Disc label side up and close the lid. The disc 

will rotate briefly. The display will indicate the number of tracks on the disc. If the disc is 

inserted incorrectly, the disc will not play. Press the "PLAY/PAUSE" button once to start 

play. Adjust the volume control as required. To stop play, press the "STOP” button.

Содержание GCDR1965R















Отзывы: