Notes:
Arrow pathway show the sequence of MP3/WMA album and track playback.
AL01-AL07
This CD ROM example has a total number of 7 MP3/WMA albums
(folders).
Blur01.MP3/WMA-Twain15.MP3/WMA This CD ROM example has a total number of 15
tracks, where ‘01’ is the first track and ‘15’ is the last track.
Skipped
indicates an album which contains non-audio files such as: jpg, wav., doc. etc.
These cannot be detected nor played on the MP3/WMA-CD player, When an album contains
mixed format files, the non-MP3/WMA files will be skipped.
MP3/WMA Properties
Standard
MPEG rate
: 32 ~ 384Kbps
Sampling Frequency
: 8-48KHz
MPEG 1/2/2.5
: Layer 2/3
MP3/WMA playback
: ISO9660 format compatible
Maximum file support: Album (Directory) 99, File (Track) 300
* Support for “Multi session and Packet write.”
File properties function on the computer will show this
information
.
IMPORTANT NIFORMATION
* Only use mp3 or WMA as file extension when creating audio files on to FLASH.
* The FLASH that has non-MP3/WMA files can not be played back.
1.
Slide CD, USB, FLASH switch to the “FLASH” position.
2.
Refer to the MP3-CD/WMA-CD PLAYBACK section for the ALBUM/FILE
SELECT AND TRACK PROGRAMMING operations.
3.
USB socket cable can be connected with PC.
4. MP3/WMA. FILE can be downloaded to FLASH from a PC.
IMPORTANT INFORMATION
* Only use mp3 or WMA as file extension when sending audio files to a USB STICK.
* A USB STICK that has non-MP3/WMA files can not be played back.
1.
Slide CD, USB, FLASH switch to the “ USB “ position.
2. Insert USB STICK to the “USB” socket.
3.
Refer to the MP3-CD/WMA-CD PLAYBACK section for the ALBUM/FILE SELECT AND
TRACK PROGRAMMING operations.
FORMAT WARNING:
All the data stored in your FLASH or USB memory (even memory is protected) will be erased
once you press “ ENTER” after you select “ FORMAT” at the “MENU” mode. “ENTER”
“FORMAT” only if you want to erase the stored data in your FLASH at USB memory.
This unit has an WMA Encoding function. You can encode music from your Audio CD to your
FLASH and USB stick in WMA format. First play the CD track you want to encode. Once you
enter to the encode mode encoding will automatically start from the beginning of the track
and automatically stop at the end of the track.
1. To set the Encoding mode, Press “REC” button for 2 seconds during the playback.
2. If both USB and FLASH are inserted the display will indicate
3. Select the target disk by DIRECTION (LEFT/RIGHT) button and press ENTER key. The
display will indicate
(E) CD-ROM drive
AL 01
Blur01.mp3
Blur02.mp3
Blur03.mp3
Blur04.mp3
AL 02
Spice05.mp3
Spice06.mp3
2men09.mp3
2men10.mp3
AL 03
Girl07.mp3
Girl08.mp3
AL 05
Boyz11.mp3
Boyz12.mp3
AL 06
Bread13.mp3
AL 07
Marx14.mp3
Twain15.mp3
Skipped
Abba01.wav
Abba02.wav
Skipped
Blur.jpg
Lyric.doc
AL 04
9. ENCODING (RECORDING) AUDIO CD TO FLASH AND USB STICK
7. MP3/WMA-FLASH PLAYBACK
8. MP3-WMA-USB STICK (STORAGE) PLAYBACK
Select target disk
FLASH
USB
Encode to FLASH
YES
NO
6. MP3-CD/WMA-CD PLAYBACK
