6. PRODUCT SPECIFICATIONS
PICK UP
System
Compact disc digital audio system
Laser diode
Material: GaAIAs
Properties
Wavelength: =780mm
Emission Duration: continuous
Laser output: <44.6µW
Error correction
Cross-interleave Reed-solomon code
AUDIO
D/A conversion
1-bit DAC 4 times oversampling
Frequency response
20-20,000Hz (+1/-4 dB)
Anti-shock
40 seconds (CD)/100 seconds (MP3) buffer
No. of channels
2 channels (stereo)
Output level
Earphone: 20mW (32 Ohms)
Wow and flutter
Below measurable limits
GENERAL
Power requirements
-2x “ AA” alkaline battery
-DC in socket accepts AC power adaptor.
Power consumption
1.2W( DC 4.5V) UNDER NORMAL CONDITION
Dimension
Approx. 142(W) X 32 (H) x 142 (D) mm
Weight
Approx. 260g not including battery (Main Unit)
Due to continual improvements of our products,specifications and design are subject to
change without notice
7. BASIC DISC PLAYBACK
1. Slide the OPEN knob to open the CD door.
2. Adjust the VOLUME to minimum.
3. Insert the disc with the label side facing up.
4. Push down in the centre until disc is
locked in place.
5. Close the lid gently until a click is heard.
6. Slide the CD/RADIO switch to CD position.
7.Press the PLAY/PAUSE button to start
playback.
8.To pause playback of the CD, press
thePLAY/PAUSE
button.The audio
output is muted. To resume playback
press PLAY/PAUSE button again. To
stop playback, press STOP button once.
9. To turn powe off,press the STOP button
again.
Remove the disc
Hold the edge and gently press the centre
pivot as illustrated. Then pick up the disc.
CAUTION:
Wait for the disc to stop rotating before
sliding the OPEN knob.
NOTE:
This unit can play 3” (8cm) single CD’s
without an adaptor. Do not use a CD single
adaptor for these discs.
To emphasize the bass sound
Set BASS BOOST switch to ON position.
Note
The bass boost performance will be
dependant on the VOLUME control setting.
Note
To pause playback of the CD, press the
PLAY/PAUSE button, The elapsed playing
time flashes in the display. To resume
playback, press PLAY/PAUSE again.
Note
Only compact discs marked with the disc
logo are guaranteed to work on this player.
Home recorded discs (CDR)recorded on
home PC’s may not play or operate
correctly.
Skipping a file(track)
You can skip a file(track)in playback mode.
In stop mode,the total number of files
(tracks) and albums appear in the display.
1. press
or
to skip a file (track),each press skips one track. During playback,the first
press on the skip backward button goes to the beginning of the current file (track).
2. In stop mode,press
button to start playback.During playback,the selected track will
be heard automatically.
