Recording CDs with synchro start
Recording from another tape(dubbing)
R E C O R D I N G
RECORDING
Recording stations
Recording from a connected device
Select the TUNER function.
Select the band.
Tune to the required the station
or select a stored preset.
(see also page 9).
Start the recording.
Press to pause recording, press
again to resume.
Stop the recording.
Select the AUX1/2 function.
Make sure the audio output of the
device is properly connected (TV
set, video recorder, minidisc, etc.)
to the AUX1/2 input sockets on the
back of the machine
(see also page 8).
Start the recording.
Press to pause recording, press
again to resume.
Stop the recording.
on the main unit
on the main unit
on the main unit
on the main unit
Select the CD function.
Open the disc compartment to load a disc.
Press again to close the disc compartment.
Select the disc to be recorded.
Stop CD playback before the recording is started.
Select the a track to be recorded.
Start the recording. CD will start in sync with the tape.
Stop the recording.
Select the TAPE function.
Load a tape with enough free space into TAPE 2.
Load the prerecorded tape into TAPE 1.
Start your dubbing by selecting dubbing speed:
"Hi-DUB" copys at double speed = half the time,
"DUB" copys at normal tape speed.
Stop the recording.
14
13
The synchro start function is an easy way of copying (tracks of) CDs to a tape: One
press of a button starts both CD playing and tape recording at the right time.
insert the tape with the open part of the cassette downward and the left hand spool
fully wound on the left.
Close the compartment door again, pushing it gently.
If you want to start at the current position of a CD, press REC button.
Use only good quality tape cassettes.
- Keep cassettes away from excessive moisture or dust, magnetic and electrical fields
(loudspeakers and computer monitors, for example)
- Always wind the tape to the beginning when you have finished.
Store with the full spool at the bottom and with the cassette in its cover.
You can protect your precious recordings from being wiped by breaking
out the safety tab on the side of the cassette.
Should you wish to re-use the tape after removing the tab, cover the hole with adhesive tape.
