10
R A D I O
l i s t e n i n g
9
Tuning stations
Programming station presets
Selecting station presets
Select the tuner.
Select the band the station is on.
Press repeatedly to manually
tune.
Press and hold until turing starts
automatically tuning.
If there is to much background
noise when listening to a station
in FM stereo, press this button to
listen in mono "
(OO)
" will
disappear from the display.
Tune to the required station as
shown above.
Store.
The system assigns the station to
a number beginning with 1, and
then stores each station one after
another.
Select previous or next preset
stations.
If you try to store a 31st FM / 16th MW station, the display will show "FULL".
To clear a preset station, select it, press
, then
for 3 seconds.
Press the
button of the remote control to switch back to stereo.
Up to 30 FM / 15 AM stations can be stored.
C D
p l a y b a c k
CD playback
Searching
Skipping
Select the CD function.
Open the disc compartment to load a disc.
Insert disc with the label facing upwards.
To insert 3 discs, place 2 discs into the slots on the disc tray
and turn the tray for the third slot, using DISC CHANGE
button.
Commence playback with the first track of the selected disc.
Use these buttons to select a specific track.
Start playback.
The currently played disc is the disc to the left when the CD
compartment is opened.
Pause playback.
Stop playback.
Press and hold these buttons to search for a particular
section of the disc.
Skip to next/previous track.
on the main unit
on the main unit
When the disc stops the machine shows its total time.
During playback the machine shows the current disc number, the current
track number, and the track's elapsed time.
