2
GB
Important information
Please check the construction set for
completeness using the position list in good time
before starting construction or commissioning
your construction team.
If individual parts are
defective or missing, we will deliver these as
quickly as possible. However, we cannot refund
the costs for any resulting construction delays to
a construction company.
Please understand that we cannot assume any
guarantee for the following defects:
- incorrect storage before assembly
- incorrect anchoring with the ground or
inadequate foundation (foundation according to
statics)
- damage due to erection errors, e. g. the house
is not level or not right-angled
- damage through a higher level of snow burden
than statically envisaged. Recommendation: lad
relief of the roof by removing the snow layer
- storm damage (insurance cases) or violent
destruction
- damage through any alteration to the design by
the client
- natural formation of cracks, branch holes,
twisting, decolouration or similar modification
(natural process; has no influence on the statics)
Storage information until construction:
- Store pallet on a level and dry surface.
- Protect from exposure to sunlight and the
influences of weather; wood can warp
drastically in a loose condition!
Maintenance tips:
Please observe the attached
information sheet “Care
instructions/Colour
treatment”.
The packaging foil can be
used to keep moisture out of
the house. It is laid according
to the ground area of the
house under the main bearing.
Given that the roof is
constantly exposed to the
weather, a covering with only
one layer of roofing paper will
not be enough over the long-
term. An additional covering
with bitumen shingles,
alternatively with a material of
at least equivalent quality, must
follow.
Foundation according to the
structural calculations
(not
included in the scope of
delivery): concrete C25/30,
each 2 Ø 12 top and bottom,
brace mat R188A (alternatively
brace Ø 6/20cm). Anchoring
of the floor beams
(in the building)
on the strip
foundation using bolts M12, e
< 60cm. The base bearings in
the storeroom of the
house must be entirely flush.
General tips and refers to:
1
1
Technical modifications reserved.
All dimensions are approximate dimensions.
Stand 01/20
2