Use
08
SENSOR button
In operating mode, press the “sensor” button to activate the motion
sensor. The indicator light under the motion sensor button goes on.
Once the motion sensor detects a movement (within about 30 degree
left and right, 2 m distance), the appliance switches on and operates
as per preset operating mode.
When it detects no more movement within 2 minutes, the appliance
switches to standby mode.
The appliance starts operating again when it detects any movement.
It cannot be used together with TIMER mode.
TIMER button
Press the button once to select one hour for instance on the control
panel, and the product will switch off after 1 hour. Each time you
press the button, you increase by 1 hour. The indicator light on for
corresponding timer setting. The maximum timer setting is 7 hours. It
cannot be used together with SENSOR mode
SWING button
Press the button to start the swing function. To stop the swing, press
the button again.
TEMPERATURE
button
Press the button to increase or decrease the temperature.
The default setting is the medium temperature. Press the or
button to cycle temperature setting among “Low”, ”Medium” and
“High”. The indicator light on in each setting.
Once the set temperature is reached, heating will start and stop to
maintain the set temperature.
Remote control
This heater equiped with remote control which user
can operate the unit according same step of control
panel. (Temperature can only setted by control
panel.)
Note:
Please use this remote control within 6
meters distance, please make sure the control
angle within 30 dgrees from left and right.
6 m
30˚
30˚
The remote control requires 1x3 V CR2025 battery
(included).
User must remove the insulating paper which
covered on battery before using remote control.
Please follow below instructions:
1. Remove the battery bracket from back of
remote control like picture A.
1
2
A
196929_s3_s1_5059340047003_GOODHOME_A5_IM_Multi_V05.indb 8
196929_s3_s1_5059340047003_GOODHOME_A5_IM_Multi_V05.indb 8
21-05-2020 14:26:58
21-05-2020 14:26:58
