5
Wiring Diagram/Schematic
F850 Stealth Series
D.C. system
DC88-276 or 1061P Reversing Control with Permanent Magnet Motor
Motor Reversing Control
Terminal A =
Motor (+) Positive
Terminal C = Main Ground (-) Negative
Terminal B = Main Power (+) Positive
Terminal D = Motor (-) Negative (Ground)
Gauge Wire
From
To
#6 Red
Marine Battery (+) Positive
Battery Selector Switch
#6 Red
Battery Selector Switch
60 Amp Manual Reset Circuit Breaker
#6 Red
60 Amp Manual Reset Circuit Breaker
Terminal “B” on Motor Reversing Control
#6 Red
Terminal “A” on Motor Reversing Control
Motor Stud (+) Positive
#6 Black
Marine Battery (-) Negative
Terminal “C” on Motor Reversing Control
#6 Black
Terminal “D” on Motor Reversing Control
Motor Stud (-) Negative
#14 Lower
“L” Terminal on Motor Reversing Control
Top Screw on Safe-T-Loc Switch
#14 Raise
“R” Terminal on Motor Reversing Control
Bottom Screw on Safe-T-Loc Switch
#14 Negative
“N” Terminal on Motor Reversing Control
Terminal “C” on Motor Reversing Control
#14 Switch Pos.
Center Screw on Safe-T-Loc Switch
Any Auxillary 5-10 Amp Fused Power Source
D
B
rev. 11/15
Motor
NEG.
POS.
GOOD
WINDLASS
Key
#6 Wire
#14 Wire
Gear Box
Lower
Raise
Safe-T-Loc
Switch
Red (+)
Raise
Positive
Negative
60 AMP
Manual
Reset
Circuit
Breaker
Battery
Selector
Switch
ON
Lower
L
NEG.
N
R
(-)
(+)
Marine Battery
Motor
Reversing
Control
MOTOR
D
POS.
NEG.
BATTERY
NEG.
OFF
C
60
AMP
rev. 8/15
POS.
NOTE:
Supply Power to
switch from any
5-10 amp fused
source
A
B