Good Way Technology UB1200B1, Руководство пользователя

Страница: 35 / 39

5. Using Bluetooth Applications
33
Network Access
The Bluetooth Network Access application makes it possible for this computer:
•
To connect to a Local Area Network (LAN) using the physical connection on a
remote Bluetooth device.
or
•
To connect to an ad hoc network provided by a remote Bluetooth device. When
joining an ad hoc network, it can take up to one minute after the connection is
established to obtain an IP address and automatically self-configure.
The type of network connection that is available is determined by the configuration
of the remote Bluetooth device.
Create a Network Access Connection
Establish a connection using one of these techniques:
•
Notification area, at the far right of the taskbar, Bluetooth icon.
•
From My Bluetooth Places.
•
Using the Bluetooth Setup Wizard.
Close a Network Access Connection
•
In My Bluetooth Places, right-click the service name and select Disconnect.
•
If the connection was established from the Bluetooth icon in the Notification area,
at the far right of the taskbar; click the Bluetooth icon, select Quick Connect,
Network Access and then select the device that is providing the service (active
connections have a checkmark in front of them).
Configure
The Bluetooth Configuration Panel > Client Applications > Network Access >
General tab provides options to configure:
•
The application name - to change it, highlight the existing name and enter the
new name.