LED
Indicator
LED
Signal
Status
OFF
Plug not powered ON/
APP light OFF
Green LED Blink
Plug not paired
Blue LED Solid
ON
Plug paired
Switch status is ON
Button
Function
Function
Operation
Switch
(ON/OFF)
Press and hold for 3 sec. to turn ON or
OFF the power.
Open status: LED aperture indicator
blue light solid ON.
Close status: LED aperture indicator
OFF
Include
Select “Add Z-Wave device” on APP, and
press the button for 3 times to include
the device.
After successfully included, LED will be
solid blue. Now the switch is ON.
Exclude
Select “Remove Z-Wave device” on APP,
and press the button for 3 times to
exclude the device.
After successfully excluded, LED will be
blinking green (1 time every 1 sec.) Now
the switch is to be included.
Reset
Press the button 3 times in 2 sec., and
hold it for more than 3 sec.
If the device is successfully restored to
the factory value, the LED aperture
indicator will be blinking green (1 time
every 1 sec.), clear all the buffer values,
and restore to the unpaired status.
Over Load
Over 1501W: Relay interrupted, and the
red light of the device continues to blink
until manually push the button to
release the red light blinking status.
(APP displays Overload screen)
Specification
Smart
Meter
Switch
Specifications
Power
AC100~240V, 50/60Hz
Max Load
1500W
Power
Consumption
0.5W
Indicator
RGB LED (Nightlight Function)
Button
Function:
Inclusion/Exclusion/Reset
Protocol
Z-Wave Plus
Z-Wave
Frequency
908.42/922.5 MHz
Data Rate
9.6kbps/40kbps/100kbps
Operation
Temperature
0~40°C
Operation Range
Up to 100 feet
Dimension
58mm(L) x 58mm(W) x 35mm(D)
Advanced
setting
Select
Smart Switch
device on APP, and enter the
following value to configure the function
Parameter
Word
Length
Value
Default
Value
Description
1
2
5~1092
30
How often to
send a meter
report(minut
e)
2
1
0~1
0
Sets the night
light mode
0:Turn off the
night light
1:Turn on the
night light
3
1
0~7
0
Set the night
light color
0:none color
1:Red
2:Orange
3:Green
4:Blue
5:Indigo
6:Pink
7:Light Pink
Z-Wave Plus
This product can be included and operated in any Z-Wave
network with other Z-Wave certified devices from other
manufacturers and/or other applications. All non-battery
operated nodes within the network will act as repeaters
regardless of vendor to increase reliability of the network.
Regulatory Compliance
PSE
Caution
【禁止す るもの及 び危険 性につ いて説明 文 を記載す る。】
【 ラ ベ ル を 使 用 者 が 貼 る 場 合 は 、
貼 る 必 要 性 を 記 載 す る 。
】
