5
4
Español
FF x1
EE x1
1
B
1
C
1
A
AA x2
GND
1
1
2
2
3
1
2
1
A
1
B
1
C
1
2
1
2
3
Retire la cadena de soporte. Inserte la cabeza del primer tornillo en la ranura
con forma de cerradura recta , gire la lámpara y pase el segundo tornillo
en la ranura con forma de cerradura curvo . Una vez que los tornillos
estén instalados, coloque la lámpara en la posición deseada. Apriete
los tornillos.
2
Replacement Parts List
SAVE THESE INSTRUCTIONS.
Hardware Kit:
ZH-AC1147F12-CLR
ZH-AC1147F24-CLR
ZH-AC1147F48-CLR
Troubleshooting Guide
Fixture doesn’t light.
Problem
Cause
Solution
Fuse blows or circuit breaker trips
when light is turned on.
Power is off.
Bad connection.
Bad switch.
Discontinue use.
Check if power supply is on.
Check cords and/or wiring.
Test or replace switch.
Call customer service.
Before doing any work on the fixture, shut off power supply at the circuit breaker panel
to avoid electrical shock.
Printed in China
2
Good Earth Lighting
®
1400 East Business Center Drive, Ste. 108 Mount Prospect, IL 60056
Good Earth Lighting
®
- 6 YEAR LIMITED WARRANTY
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of (6) years from the date of original purchase by the
consumer. The fixture is not warrantied for use in a commercial or retail application. The warranty is limited to use in a residential environment. We will repair or replace (at
our option) the unit in the original color and style if available, or in a similar color and style if the original item has been discontinued, without charge. Defective units must
be properly packed and returned to the manufacturer with a letter of explanation and your original purchase receipt showing date of purchase. Call
1-800-291-8838
to obtain
a return authorization number and an address where to ship your defective product. Note: C.O.D. shipments will NOT be accepted. The liability of the manufacturer is in any
case limited to replacement of the defective light fixture product. The manufacturer will not be liable for any other loss, damage, labor costs or injury which is caused by the
product. This limitation upon the liability of the manufacturer includes any loss, damage, labor costs or injury which is (I) to person or property or otherwise; (II) incidental or
consequential in nature; (III) based upon theories of warranty, contract, negligence, strict liability, tort, or otherwise; or (IV) directly, or indirectly related to the sale, use, or
repair of the product. This warranty gives you specific rights, and you may also have other rights which vary from state to state.
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the user’s authority to operate the equipment.The user is cautioned that any changes or modifications not
expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation between the equipment and
receiver. 3) Connect the equipment into an outlet on a circuit different from that of the receiver. 4) Consult the dealer or an experienced radio/TV technician for help.
1
1
1
1
2
2
3
Ensure Rope Light is unplugged prior to adding additional length to the series. The Rope Light can be extended up to
256 feet. Turn the plastic end cap counter clockwise to remove from the first Rope light. Remove power cord from the
extension Rope light.
Connect both ends of the ropes (the male and female halves plug into each other). Make sure all connectors are firmly
tightened and secured. Turn the plastic end cap clockwise to lock on the last Rope light.
This plug contains an electrical fuse safety feature. (a) Disconnect power before replacing the fuse. (b) Grasp plug and remove from the receptacle or other outlet devise.
(c) Do not unplug by pulling on the cord. (d) Unscrew the fuse access cover on top of attachment plug. (e) Remove old fuse carefully. (f) Never attempt to replace the fuse
with higher watt fuse. Use only 5 Amps 125 Volt fuse. Failure to do so may be a fire hazard. (g) Set new fuse in holder. (h) Reinstall the fuse access cover.
Caution:
Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged.
Installation:
How to replace the fuse:
Extending the Rope Light:
Connect the cord to the Rope Light by aligning cord adaptor with the light adaptor and turn clockwise.
Using included screws to attached the mounting clips to the mounting surface. Use the nylon ties to attach Rope Light to more permanent structures. Press Rope Light into
mounting clips.
NOTE:
Rope Light forms more easily after warmed up. Plug in the light to warm up, unplug, then press into mounting clips.
Plug in Rope Light to turn on.
3
2
2
English
Model / Modèle / Modelo #: LF1086-BR4-32LF2-G
32 in. Portal LED Flush Mount Ceiling Fixture
(Page 2)
Plafonnier encastré à DEL Portal de 81,28 cm
(Page 3)
Lámpara LED de techo de instalación al ras Portal de 81,28 cm
(Página 4)
English
GND
CC
x1
EE
x1
AA
x4
BB
x2
DD
x2
FF
x1
*Actual hardware may differ from illustration
* La quincaillerie incluse peut être différente de l’illustration.
*Los aditamentos reales pueden diferir de los que se muestran en la ilustración.
Hardware kit / Trousse de quincaillerie/ Kit de aditamentos
Required / Nécessaire/ Obligatorio
Diffuser
Diffuseur
Difusor
Fixture Pan
Support du luminaire
Bandeja de la lámpara
Locking Tab
Languette de verrouillage
Lengüeta de empalme
English
Warnings and Cautions (Page 1)
Fixture Installation (Page 2)
Replacement Parts List (Page2)
Troubleshooting Guide (Page 5)
Good Earth Lighting
®
Warranty (Page 6)
