User‘s Manual
22
4.2.3 Alternative through desk mounting
1.
Remove the rubber protectors at the
desk
clamps
(C)
inside.
2.
Remove the 3 Allen screws by Allen
key (P-B) anti-clockwise out of the
desk
clamp
(C).
3.
Turn the screw of the counter plate
off the desk clamp (C) by Phillips
screwdriver.
Fig. 17: Desk mounting - Alternative through desk mounting 1
P-D
4.
Install the pressure plate (P-D)
instead the desk clamp (C) to the
bottom
side
of
the
stand.
5.
Glue the rubber protectors back on.
Fig. 18: Desk mounting - Alternative through desk mounting 2
6.
Place the stand above the installation
hole and slide the thread rod through
the pressure plate (P-D).
7.
Tighten the thread rod clockwise by
hand.
Fig. 19: Desk mounting - Alternative through desk mounting 3
