21
Risk of material damage by inappropriate ambi-
ent conditions
>>
>>
>>
Keep enough space around product and to the whole
system to ensure proper ventilation and mobility.
Mount only to sufficiently thick and stable surfaces.
Protect against pressure points.
Tab. 15: Wall mounting
Allen key 4mm
with screwdriver
P-A
Allen key 5mm
P-B
4.2.1 Pre-assembly
1.
Check the strength and stability of the
surface before installing and do not
damage
them.
2.
Choose a suitable mounting place.
3.
Screw the rod unit (B) clockwise into
the
desk
clamp
(C).
4.
Subsequently fix it by thightening the
Allen screws with Allen key (P-A), like
shown.
5.
Adjust the height of the stop ring (S),
that the flat screens do not put on the
surface.
Fig. 14: Desk Mounting - pre-assembly 1
6.
Clip the cover caps (D) on the right
and left side of the holder unit (A).
Fig. 15: Desk Mounting - pre-assembly 3
4.2.2 Table edge mounting
Thighten the desk clamp (C) clockwi-
se by hand.
Fig. 16: Desk mounting - Table edge mounting
