Goobay 60818, Руководство пользователя

Страница: 10 / 16

10
Manual
5 Operating Elements:
5.1 Introduction:
The HDMI
TM
switcher can be switched by using the SELECT button or by using the
automatic and intelligent switching function. The HD signals of the source devices are to
be transmitted to an output device. Plug in the source devices to the INPUTS 1 and 2 or
1, 2 and 3. A red Power LED shows the product is ready to use.
5.2 Connecting:
- Connect the input of the output device to the output plug of the switcher.
- Connct the outputs of the source devices to the INPUTS of the switcher.
1. Connect the source devices and the output device like described in the pictures.
2. Press the SELECT button to select the preferred channel.
AVS 46:
AVS 47:
5.3 Intelligent switching function:
1. When connecting a source device to the switcher or switching on an already connected
source device, the switcher changes to this channel automatically and selects the new
device in that way. The selected channel will be shown by the corresponding LED.
2. When switching off or disconnecting a source device, the switcher automatically
changes to the next connected source device in order 1-2-(3).
In case of switching a source device into stand-by mode, the switcher is not able
to use the intelligent switching function. That‘s why switch off the source device
completely or disconnect it from mains.
NOTE: