1
Safety Notes
1. Please carefully read this document
before installing and using the
equipment.
2. Please keep this document for future
reference.
3. Observe “Cautions” in all operation
guides.
4. Observe the rules and principles in all
operation guides.
5. Clean equipment: before cleaning the
equipment, power it off and then
disconnect all units of the equipment.
Use dry soft cloth to clean the
equipment.
6. Do not use any nonconforming
accessory or fitting without approval
from the Company. It is likely to cause
hazardous accident.
7. Do not put the equipment in humid
places so as not to cause equipment
damage or danger.
8. Do not place the equipment on an
unstable table; prevent equipment
vibrating during transportation to avoid
damage to the equipment. Select
proper package or original package for
transportation.
9. Keep the equipment room ventilated
so as to prolong the service life of the
equipment.
10. Service voltage: America and Japan:
AC 110V-120 V and 60 Hz Eurasia:
AC 220V -240 V and 50 Hz.
11. Power
socket:
three-pin
Ground
Socket.
12. Do not place heavy objects on
extension
cables
necessary
for
equipment connection. there is Make a
detour if routing is required to ensure
normal operation of the system.
13. Connect all conference units in the
system equipments in the whole
system may run abnormally. Contact
GONSIN after-sale service center in
case
of
special
requirements.
Technical support Tel: 0757-22360959.
14. Unless permitted by the Company, do
not disassemble shell and avoid any
hard conductor or liquid from leaving
or permeating into the shell.
15. Do not disassemble the equipment on
your own when your equipment needs
service. Contact the customer service
center of GONSIN: 400-883-1138.
16. All GONSIN products shall be against
the warranty card based on system
category, except for product issues
resulting from man-made reasons or
force majeure, for example:
A. Equipment is dropped and broken
man-made reasons;
B. Equipment is damaged due to
misoperation by operators;
C. Some equipment spare parts are
damaged or missing due to
arbitrary disassembly;
D. Equipment is dropped and broken
due to natural disasters.
