13
is too large or the maximum number of speakers needs to be increased, extensible cascaded
WAP can be used.
The following figure shows the wiring diagram:
2.4.3 Connection with Wireless AP and Control PC
The successful communication between the congress server and a wireless terminal
must be supported by a wireless AP WAP-30C to perform signal conversion. The
conference server has 4 RJ-45 connectors, any one of which can be connected to the
control computer. The following figure shows the wiring diagram:
2.4.4 Connection with Mixer or Amplifier
The conference server has one RCA connector unbalanced audio input (LINE IN), one
RCA connector unbalanced audio output (LINE OUT), and one balanced audio output
(CANON). Connected to the sound amplification system, the speaker's voice can be
amplified and output.The connection only needs to use an RCA unbalanced audio
output "Line OUT" or a balanced audio output "Canon" to connect to the audio output
interface of the server, and the other end is connected to the input end of the sound
amplification system. The following figure shows the wiring diagram: