-
1-
INTRODUCTION
The
MT-305A 3G/HD/SD-SDI to HDMI & Audio Scaler Converter with 3.5” LCD Monitor & local
loopout
is an advanced SDI monitor with multi-format and multi-pattern support. Not only receiving SDI
signal, MT-305A can also bypass SDI input to SDI output. It is equipped three buttons and 3.5” panel to
ease the control. With 3.5” panel, the output signal can be monitored and controlled through OSD, such
as the resolution and image adjustment. This device can also be used as a tool for scanning eye diagram
to check the quality of input SDI cable. In addition, it provides a variety of test patterns, which can be
used as a simple SDI pattern generator. MT-305A provides a cost effective way to monitor video devices
and displays.
FEATURES
OSD control interface
Push button for control
SDI loop-out
Supports eye diagram scanning
Supports audio level bars
Supports the cable length indicator
Supports output test patterns
Input bandwidth 2.970Gpbs
Output maximum pixel rate : 165MHz
Output video resolutions support multiple VESA standards
Deinterlacer supported
Supports nosie reduction and video enhancement features
Video H/V mirror supported
Active video area adjustment supported
USB firmware upgradable for expanding compatibility
PACKAGE CONTENTS
1x MT-305A
1x DC 5V 2A
1x User Manual
-
2-
SPECIFICATIONS
Model Name
MT-305A
Technical
Role of usage
SDI to HDMI Converter with 3.5” LCD monitor
SDI standards
SD-SDI, HD-SDI & 3G-SDI
Input Video bandwidth
2.970 Gbit/s, 2.970/1.001 Gbit/s
Input Video support
[3G] 1080p @50/59.94/60Hz (4:2:2)
[HD] 720p @50/59.94/60Hz, 1080i @50/59.94/60Hz, 1080p @24/30Hz
[SD] NTSC @59.94Hz, PAL @50Hz
Output Video Frequency
bandwidth
165MHz
Audio support
PCM (48KHz only up to 8 channel)
ESD protection
[1] Human body model — ±19kV [air-gap discharge] &
±12kV [contact discharge]
[2] Core chipset — ±2kV
PCB stack-up
4-layer board [impedance control — differential 100
; single 50
]
Firmware update
Feasible via USB Port
CEC Channel
N/A
Input
1x BNC [SDI]
Output
1x HDMI + 1x BNC [SDI loop-out] +1x 3.5mm(Stereo)
BNC connector
3G 75
Ω
inter-locked socket
HDMI connector
Type A [19-pin female]
USB connector
Micro USB
Mechanical
Housing
Metal enclosure
Dimensions
[L x W x H]
Model
144 x 82 x 24mm [5.6
" x
3.2
" x
0.9
"
]
Package
264 x 170 x 77mm[10.3" x 6.7" x 3"]
Carton
430 x 358 x 291mm[1'4" x 1'2" x 11.5"]
Weight
Model
236g [8.3 oz]
Package
546g [1.2 lbs]
Fixedness
Wall-mounting case with screws
Power supply
5V DC
Power consumption
5 Watts [max]
Operation temperature
0~40
C [32~104
F]
Storage temperature
-20~60
C [-4~140
F]
Relative humidity
20~90% RH [no condensation]
