4
PANEL DESCRIPTIONS
Transmitting unit
►
EX-57V2K-U-TX
Front Panel
1. Ethernet port for LAN:
Connect to network device
2. DIP Switch:
PIN#1: Setup the USB communication
PIN#2: Setup the RS-232 mode for serial communication channel
PIN#3: For Firmware Update
3. RS-232:
Connect to serial port device with a DSUB-9 male-male or male-female cable here
F/W update for Valens chipset
4. LED:
TX /RX link indicator
5. RJ45:
Plug in a Cat-5/5e/6 cable that needs to be linked to the transmitting unit RX
Rear Panel
6. +24V DC:
Connect to a 24V DC power supply.
7. LED:
Power indicator
8. HDMI IN:
Connect to a HDMI source with a HDMI male-male cable
9. Stereo:
Analog audio input
10. RCA connector:
remote ARC output
11. IR Blaster:
Infrared 3.5mm socket for plugging in the extension cable of IR blaster
12. IR Receiver:
Infrared 3.5mm socket for plugging in the extension cable of IR receiver
13. USB:
Connect to USB Device
14. Mini-USB:
Connect to USB Host
