GoMax Electronics MA-5544H Скачать руководство пользователя страница 19

17

 

FAQ 

Q

  Can every TV work with the HDMI matrix? 

A

  Basically, the answer is YES. But if your TV can not support 1080p, please refer the EDID 

LEARNING section to learn EDID from your TV. 

Q

  What is EDID? Why do I need to learn EDID? 

A

  EDID contains the whole information of the display such as the resolution and audio setting which 

this display can support. Therefore, based on the EDID information, media player will pick up the 
most suitable resolution and audio setting to the display. In order to faithfully transmit the EDID 
information from display to the media player, learning EDID from display to this device is 
necessary. 

Q

  What should I do to learn EDID for the matrix? 

A

  Due to the limitation of HDMI, the source device can only output one format of video and audio. In 

other words, the source device cannot output 720p and 1080p video at the same time, or output 
stereo and surround sound at the same time. Therefore, you may need to manually setup  each 
HDMI input for desirable audio/video output format. The mechanism of EDID Learning is to pick up 
the HDMI display with the lowest capability among the ones you would use for this input source. 
For example, if user would like to play the Input-2 upon output-2, output-3 and output-4, and only 
output-3 cannot support 1080p [support up to 720p only], please learn the EDID from the display 
connected to the output-3 at the Input-2 port. Of course, if outpt-3 would get the HDMI signals from 
every HDMI input, please learn EDID information from output3 to all four HDMI inputs. For more 
information about EDID Learning, please refer to EDID LEARNING section. 

Q

  My TV can support 1080p, but why there is no audio? 

A

  The factory default EDID of this device is 1080p & 2ch audio. However, there would be a problem 

after you change to use 1080p &  7.1ch  if the TV cannot support 7.1ch audio. Please  use the 
default EDID, 1080p & 2ch audio. 

Q

  When I set an audio amplifier (AV receiver) between TV and the matrix to extract 7.1ch 

audio, but why there is still no audio? 

A

  Basically, the default EDID of the chosen input can support 7.1ch audio, but the problem is that the 

EDID of the amplifier still cannot match the default setting. Therefore, the best method is to learn 
EDID from the amplifier directly. Please refer to EDID LEARNING section and follow the steps to 
learn the EDID. When learning EDID from the amplifier, user just needs to connect the matrix and 
amplifier.  Please don't connect HDMI cable between amplifier and TV when the EDID 
learning is proceeding.
 

Q

  When I play the same content upon multi-displays, why only the TV equipped with amplifier 

can have 7.1ch audio, and the others don't have 7.1ch audio even no stereo? 

A

  Due to the limitation of HDMI, the source only can choose one video and one audio format to play, 

which can be either 1080p and 7.1ch or 1080p and stereo audio. It means when the user sets the 
matrix at 1080p and 7.1ch, the source will only play the content under this format. Therefore if the 
TV cannot decode 7.1ch audio, there is definitely no audio. 

 

Содержание MA-5544H





















Отзывы: