-
7-
HDMI PIN DEFINITION
Type A (Receptacle) HDMI
Pin 1
TMDS Data2+
Pin 11
TMDS Clock Shield
Pin 2
TMDS Data2 Shield
Pin 12
TMDS Clock–
Pin 3
TMDS Data2–
Pin 13
CEC
Pin 4
TMDS Data1+
Pin 14
Reserved (N.C. on device)
Pin 5
TMDS Data1 Shield
Pin 15
SCL
Pin 6
TMDS Data1–
Pin 16
SDA
Pin 7
TMDS Data0+
Pin 17
DDC/CEC Ground
Pin 8
TMDS Data0 Shield
Pin 18
+5V Power
Pin 9
TMDS Data0–
Pin 19
Hot Plug Detect
Pin 10
TMDS Clock+
-
8-
OPERATION APPROACH
Software Control through Ethernet port
1.
System Requirement
(1)
OS information: Microsoft Windows XP/7/8/10
(2)
Software size: 30MB
(3)
Minimum RAM requirement: 256MB
2.
Start the software control program
(1)
Extract the
Setup_AVP_AVX Control Tool.zip
file and follow the installation wizard to install
the software.
(2)
Open the
blueriver_control.exe
file from server folder.
(3)
Click the
AVP.exe
file from AVP Control Tool folder to start using the software.
3.
Control Interface
When you click the executable file, the following screen will pop up. Please click
“Refresh”
to
complete the device connection.
1
HDMI
5
RS232
9
Infrared
2
Display Wall
6
USB Routing
10
Multiview
3
HDMI Audio
7
EDID
4
Analog Audio
8
Firmware Update
Users can drag the encoder and decoder Device ID at the bottom of each page to do
input/output mapping, or select the Device ID to set.
a. Type (AVX/AVP) – VID – PID (15-over Copper/16-over Fiber)
b. Output Device ID (derived from the device MAC address)
c. IP address
d. Input Device ID
Users can select Device ID and enter the name. Then click
"Apply"
to apply the device name.
1
2
3
4
5
6
7
8
10
9
a
b
d
c
