-
3-
SPECIFICATIONS
Model Name
AVP-57FC-U
Technical
Role of usage
Transceiver
HDMI compliance
HDMI 2.0a
HDCP compliance
HDCP 2.2 & 1.4
Video bandwidth
Single-link 594MHz [18Gbps]
Video support
480i / 480p / 720p / 1080i / 1080p60 / 4K2K@30 / 4K2K@60 4:4:4
HDMI over UTP
4K2K@60 4:4:4 100m (330ft) [CAT.6A]
HDMI over fiber
4K2K@60 4:4:4 up to 300m (990ft) (OM3) / 400m (1320ft) (OM4)
[multi-mode optic cable]
Audio support
Surround sound [up to 7.1ch) or stereo digital audio
Equalization
Auto
Input TMDS signal
1.2 Volts [peak-to-peak]
Input DDC signal
5 Volts [peak-to-peak, TTL]
ESD protection
Human body model — ±15kV [air-gap discharge] & ±8kV [contact discharge]
PCB stack-up
6-layer board [impedance control — differential 100
Ω
; single 50
Ω
]
IR pass-thru
Bi-directional
RS-232 support
Yes
I/O connector
2x HDMI + 4x 3.5mm + 3x USB + 2x RJ45 + 1x fiber + 1x RS-232
HDMI source control
Controllable via IR pass-through from RX to TX or TX to RX with IR extenders
HDMI connector
Type A [19-pin female]
RJ-45 connector
WE/SS 8P8C
USB connector
Type A
3.5mm connector
IR receiver / IR blaster / Stereo
Mechanical
Housing
Metal enclosure
Dimensions
[L x W x H]
Model
172 x 162 x 30mm [6.7" x6.3" x1.2"]
Package
325 x 196 x 92mm[12.7" x 7.7" x 3.6"]
Carton
490 x 426 x 352mm[1'6" x 1'4" x 1'2"]
Weight
Model
685g[1.5 lbs]
Package
1400g [3 lbs]
Fixedness
Wall-mounting case with screws
Power supply
12V DC
Power consumption
18 Watt [max]
Operation temperature
0~40°C [32~104°F]
Storage temperature
-20~60°C [-4~140°F]
Relative humidity
20~90% RH [no condensation]
-
4-
PANEL DESCRIPTIONS
Front Panel
1.
USB 2.0:
1)
Connect to USB device when the USB routing on the software is set as “remote”
2)
Connect to
computer when the USB routing on the software is set as “local”
2.
USB-HID:
[Top USB] Connect to keyboard or mouse
[Bottom USB]
1)
Connect to keyboard or mouse when the USB routing on the software is set as “remote”
2)
Connect to computer when the USB routing on the software is set as “local”
3.
Indicator LED:
USB-HID LED
4.
10G Copper IN/OUT:
Plug in RJ-45 cable that needs to be linked to the other unit
5.
Indicator LED:
Link LED
6.
10G SFP IN/OUT*:
Plug in single/multi-mode fiber optic cables cable that needs to be linked to the other unit
(*Fiber module is NOT included in the product)
7.
Ethernet Port:
Ethernet control port
8.
Dip Switch:
DIP Switch Position
Description
PIN#1
PIN#2
ON [
]
OFF [
]
FW update 1
ON [
]
ON [
]
Reserved
OFF [
]
ON [
]
FW update 2
OFF [
] OFF [
]
Normal mode
PIN#3
ON [
]
Select transmission over SFP
OFF [
]
Select transmission over copper