Lens Types
Control Elements and LED Indicators
Page 12 (44)
at
os
2-
3_r
ev02_
so
-40
0-
800
-v7
-5
-0_en_r
ev
-b
2012
-01
-03
For the projector lenses, the aperture value is fixed and cannot be
changed.
Select a set of lenses matching the required measuring volume and
camera positions (e.g. SO, 400, 800), and screw it into the cameras
and the projector.
To avoid getting dirt into the cameras and the projector, always equip
the devices with lenses or blind caps, even when they are switched
off. When changing the lenses, fix the new lenses in place imme-
diately.
Screw in the lenses carefully by hand, lock the focus locking ring, if
necessary, to ensure screwing in without any problems.
5.
Control Elements and LED Indicators
Yellow LED, illuminates in case of active Gigabit transmission at interface CAM L.
Green LED, illuminates in case of data transmission at interface CAM L.
•
Shows green light if the sensor is ready for operation.
•
Shows orange light while the operating system of the sensor starts.
•
Shows red light in the moment of being switched on or in case of a failure. You
will find additional status information on the Web interface of the sensor, see 5.1.
Yellow LED, illuminates in case of active Gigabit transmission at interface CAM R.
Green LED, illuminates in case of data transmission at interface CAM R.
Pushbutton to switch the sensor on and off.
