ADL GDL90 Traffic Receiver Interconnect
8 / 12
Revision 1.00 - 11.05.2022
8
Configuring the GDL90 Data Stream
Frist make sure your traffic device is really broadcasting GDL90 traffic data. For some
devices like the Stratux this is always the case while others like the AT1 might have to
be reconfigured.
Then connect to the traffic device WiFi, open the ADLConnect app and wait until it
connects to the ADL device. On the Config page you can now set up the GDL90 data
stream. We suggest you select:
WiFi GDL90: “Custom”
Below you can select which data is actually sent out by the ADL device. The fields are:
HB
– heartbeat
GPS
– GPS data
AI
– AHRS / attitude data if your ADL device is equipped (ADL180(B)/190/200)
TF
– Traffic data if any is available to the ADL device (internal or RS232 wired sources)
WX
–Weather data
We recommend that you usually select AI, TF and WX only. Sending the heartbeat and
GPS in parallel to similar data sent from the traffic device usually confuses the
navigation app. In some instances you might also deactivate AI and / or TF if this data
might be redundant to capabilities of your traffic device.
Below you can adapt the GDL90 data stream to your target application. This makes
slight adjustments to the data format based on your favorite navigation app.
Once you made your choices,
press “Save and Reboot ADL” below.
Figure 7
WiFi GDL90 Configuration
