ADL GDL90 Traffic Receiver Interconnect
5 / 12
Revision 1.00 - 11.05.2022
Figure 3
Connecting to the ADL Connect WiFi
Open the ADLConnect app and when properly connected got to the Config page. Enter
the values we recorded above in those fields:
WiFi Mode: “Client“
WiFi SSID: as recorded above (upper and lower case matters)
WiFi Password:as recorded above (upper and lower case matters)
If no password is used simply leave this field empty (make sure it is really empty)
WiFi Subnetmask: as recorded above
Now press “Save and Reboot ADL”
The ADL device will reboot and the 90 second cycle will start. If you wish you can
connect to the ADL Connect WiFi and verify the status messages at the bottom of the
“Update WX” page.
Connect your iPad to the traffic device WiFi. Open the ADLConnect app and wait for it
to detect your ADL device. Remember this will take 90 seconds. Now you should be
able to use your ADL device as usual just that you connected to it using the WiFi
provided by the traffic device.
