INSTALLING THE MONITOR IN A UNIVERSAL EMBEDDING BOX
Make a hole in the wall to position the top of the universal embedding box at a height of 1.60 m from the ground.
The minimum distance between the embedding box and the closest object must be 5 cm.
Positioning the embedding box:
1 6
. 0m
Pass the cable through the hole made in the embedding box. Embed the box and ensure that it is level and
$
ush.
Fix the terminal block of the monitor with the screws supplied with the embedding box.
Positioning the embedding box and mounting the terminal block:
Positioning the monitor:
Avoid placing the monitor near sources of heat, in dusty locations or smoky environments.
7
Connect the cables to the monitor (see page 4), position the monitor perpendicular to the terminal block ensuring
that the holes in the base of the monitor line up with those on terminal block and then move the monitor
,
towards terminal block until the monitor is
#
xed with the magnets located on monitor
,
.
Remember to remove the protective covering from the front of the monitor once installation has been completed.
1
2
3
1
2
3
THERA G 2
B MONITOR
Screws supplied with
.
the embedding box