INSTALLING THE MONITOR IN A SUP-GB2 SURFACE BOX
The upper part of the SUP-GB2 surface box must be positioned at a height of 1.60 m. The minimum distance
between the sides of the surface box and the closest object must be 5 cm.
Positioning the SUP-GB2 surface box:
To
#
x the SUP-GB2 surface box to the wall, drill two 6 mm diameter holes and use the screws and plugs supplied
with the SUP-GB2.
Fixing the SUP-GB2 surface box to the wall:
Positioning the monitor:
1
2
3
Avoid placing the monitor near sources of heat, in dusty locations or smoky environments.
x
4 30
6
Connect the cables to the monitor (see page 4), position the monitor perpendicular to the SUP-GB2 surface box
ensuring that the holes in the base of the monitor line up with those on surface box and then move the
,
monitor towards surface box until the monitor is
#
xed with the magnets located on monitor
,
.
Remember to remove the protective covering from the front of the monitor once installation has been completed.
1
2
3
1 6
. 0m
THERA G 2
B MONITOR