golmar Soul S5110/ART 7W, Инструкция по эксплуатации, Страница: 33 / 40

33
Lock release connection
Relay output auxiliary device connection
The drawing shows the connection of a 12Vd.c. lock release, with a maximum consumption of 270mA. The use of
the Golmar CV-14 / DC, CV-24 / DC, CV-14P / UNI or CV-24P / UNI models is recommended. Activation is
done through the icon.
The activation time is 3 seconds, it being possible to adjust it between 0.5 and 10 seconds (see page 36).
1
The drawing shows, as an example, the connection of a second AC lock release. The relay can switch loads of 6A /
24V. Activation is done through the icon.
The activation time is 3 seconds, it being possible to adjust it between 0.5 and 10 seconds (see page 36).
2
If the lock release you are going to use is AC, use a relay and a transformer suitable for consumption. The example
shows a Golmar SAR-12/24 relay and a TF-104 transformer (12Va.c./1.5A).
CV- BUS CV+ AP+ BUS
CV- BUS CV+ AP+ BUS IN IN C NC NA
CA UT IO N
PRI PRI
Mains
100~240Vac
SEC SEC
GND C CCTV AP- NA
CA UT IO N
PRI PRI
Mains
100~240Vac
SEC SEC
SOUL S5110/ART 7W VIDEO INTERCOM KIT
INSTALLATION DIAGRAMS