
10
Installation
Avoid locations near heat sources, dusty or with a lot of smoke.
For a correct installation, use the supplied template (page 38).
1. Locate the top of the template at a height of 1.65m.
2. If you are going to use an embedding box to pass the cables, match it with the holes corresponding to the chosen
box model and fix the bracket. If you prefer to fix the bracket directly on the wall, make four 6mm holes at the
indicated points; insert the supplied plugs and screw the bracket.
3. Pass the installation cables through the central hole and connect them to the removable wiring connectors
following the indications of the installation diagrams. Before connecting the wiring connectors to the monitor, set
the configuration switch as indicated below.
4. Connect the wiring connectors to the monitor and place the monitor front to the bracket, matching the slots.
Move the monitor down to fix it.
Wiring connectors (K)
For a more comfortable installation, the wiring connectors are removable and are supplied in a separate bag. Once
the connectors are wired, place them in their position.
BUS, BUS: communication bus (polarity free).
24V, GND: local power supply input.
SA, GND: ringer output (50mA/12V maximum).
HZ, HZ: doorbell push button input.
SA
GND
HZ
HZ
BUS
BUS
24V
GND
ON
1
2
3
4
5
6
7
8
Configuration switches (R)
Switches 1 to 5.
Assign the monitor address corresponding to its push button on the door panel. Switches 3 to 5 must remain in
the OFF position.
Apartment 1
Apartment 2
Apartment 3
Apartment 4
ON
1
2
3
4
5
6
7
8
ON
1
2
3
4
5
6
7
8
ON
1
2
3
4
5
6
7
8
ON
1
2
3
4
5
6
7
8
Switches 6 and 7.
They define if the monitor is master or secondary. Each apartment must have a master monitor only. In the case
of apartments with more than one monitor, the monitor with WiFi transmitter should always be the master one.
Switch 8.
Loads the monitor with the end of line resistor when set to ON. Activate it on those monitors where the bus cable
path ends. Deactivate it only in the intermediate monitors.
Slave 1
Slave 2
Slave 3
Master
ON
1
2
3
4
5
6
7
8
ON
1
2
3
4
5
6
7
8
ON
1
2
3
4
5
6
7
8
ON
1
2
3
4
5
6
7
8
SOUL S5110/ART 7W VIDEO INTERCOM KIT
ART 7W/G2+ MONITOR