7
Configuration switches (R)
All switches are factory set to OFF.
Configuration changes should be made with the equipment turned off. If they are performed with the equipment
turned on, disconnect it for 10 seconds after any modification.
Note: Configuration switches for the "KIT S5510/ART 4 1P" with SOUL/4.3 and SOUL/1 door panels
version V04 and next.
Switch 2, must be OFF.
Switch 1.
Defines the door panel address.
OFF-OFF
OFF OFF
-
O -OFF
N
Door panel 1
Door panel 2
Apartment 1
Switches and must be OFF.
3
4
Setting the audio level
If the audio volume on the door panel after starting up the device is not adequate, use the volume control
potentiometer (S). This setting affects the communication and confirmation tone audio level.
BUS
BUS
CV-
CV+
AP+
C
NA
GND CCTV AP-
ON
1
2
3
4
ON
1
2
3
4
ON
1
2
3
4
ON
1
2
3
4
S
SOUL S5110/ART 4 VIDEO DOOR ENTRY SYSTEM KIT
SOUL PANEL/4.3
