8
ART 7AW/G+
IP G+
www.golmar.es
7. SETTINGS
In this section of the manual, we will see in detail the system settings. If you want to see other type of settings to which we can access with
the monitor, see the ART 7AW/G+ user manual that you will find in the “Downloads” tab in the product website.
When pressing over the system settings, in the monitor will appear a screen in which you must type the installer password to be able to
access the setting system menu. The default installer password is:
2718
.
Once you have access the system settings, the following screen will appear:
System
Privacy
Address
Password
****
SIP
S
P
Devices
Guard
To re-set the monitor settings to a factory values, we must press over the icon located in the bottom right on the screen. The
following screen will appear and we must confirm the factory reset of the monitor settings
.
Reset all settings ?
Reset
6.3. About
SIP server
About
LOCAL INFORMATION
UNIT VERSION
PASSWORD
Local IP
Hardware
Administrator
Gateway
Firmware
Unit
MCU
Subnet Mask
Server IP
MAC address
10.0.0.107
C
10.0.0.1
1.00
1.00
255.0.0.0
10.0.14.9
e6:
ff
:6f:78:6a:27
Dialing code length
Block number
Apartment address
Monitor unit
5
1
1
1
Reboot
Update
888999
0000
Apply
Settings
Restore
Return to factory values.
Reboot device.
Update FW version..