DOOR PANEL INSTALLATION
1650
1850
1450
mbedding box positioning.
E
Break the bottom flange
to pass the cables through.
reparing the embedding box.
P
O
To make a call the visitor should press the push button corresponding to the apartment he wishes to
contact. An acoustic tone will be heard confirming the call is in progress once the push button has
been pressed. At this moment the call will be received at the monitor (telephone) in the dwelling.
During the call the visitor can correct his call by pressing a push button corresponding to a different
apartment, in which case the original call is cancelled.
O
In systems with several access doors, the other(s) door panel(s) will be automatically disconnected: if
a visitor tries to call from other door panel an acoustic tone will be heard confirming the system is
busy.
O
The call tone will be reproduced on the monitor during 3 seconds: after this time the picture will
appear on the master monitor without the visitor being aware of this. To see the picture in a slave
monitor press the push button, dissapearing the picture on the other monitor. If the call is not
answered in 45 seconds, the system will be freed.
O
To establish communication pick up the monitor (telephone) handset. The communication will last for
one and a half minutes or until the handset is replaced. Once the communication has finished the
system will be freed.
O
To open the door, press the door release push button during call or communication progresses: with
one press, the door release operates during 3 seconds. During the lock release activation an acoustic
tone will be heard on the door panel confirming the lock release is activated.
O
The monitor and telephone push buttons description is shown on pages 80, 85 and 89 respectively.
IMPORTANT NOTICE
O
O
O
One way systems are delivered fully programmed.
Wire the door panel push buttons as it is shown on page 74.
In case of two ways systems it will be only necessary to program the monitor which
will be called through the left push button.
SYSTEM CHARACTERISTICS
O
With Tekna Plus monitors, addition to the T-940 Plus telephones features:
w
Privacy on audio and video communications.
w
"Autoswitch-on" function.
w
"Video-spy" function with the communication channel remaining free.
w
Call to a slave porter's exchange.
w
Activation of two auxiliary devices: secondary telecamera, courtesy light, ...
w
B/W & Color monitor.
w
Brightness and contrast control (color control in case of color screen).
Coming from previous page
SYSTEM OPERATION
72
71
The upper part of the door panel should be placed at 1,65m. height roughly.
The hole dimensions are: 125(W) x 140(Al) x 57(D) mm.
The door panel has been designed to be placed under most of the environmental conditions.
However it's recommended to take additional cautions like rainproof covers. To obtain a good
quality picture on video door entry systems, avoid direct incidence from light sources.
Pass the wiring through the hole made in the
bottom part of the embedding box. Level
and flush the embedding box. Once the
embedding box is placed, remove the
protective labels from the attaching door
panel holes.
