golmar 50124319, Инструкция по эксплуатации

Страница: 17 / 56

DOOR PANEL PROGRAMMING
124
1
st
access code
:2222
O.K.
yes
access control
*
ccess control menu.
A
O.K.
access control
:2222
modify value
:4013
1
st
access code
O.K.
3 1 0 4
2
nd
access code
3
rd
access code
:3333
:4444
Coming from previous page
Continue
To enter into access control menu, follow
the steps described on page 119 and
and press when the display shows the
message
access cONtrOl
.
Allows to enable or disable the access control
feature (lock release activation by entering
a PIN code).
Press to change this value.
The system has three different codes to activate
the lock release.
To change the first code press : the display
will show the message
modify value
.
Key in the new code and confirm by pressing
.
If is pressed the former value will be
restored.
Always use a four digits code .
To change the second code proceed as
described on the previous menu.
To change the third code proceed as
described on the previous menu.
This code allows the lock release activation
during a programmable time period,
as described on the next menu.
123
DOOR PANEL PROGRAMMING
:03
door open time
modify value
:03
O.K.
:10
door open time
O.K.
1 0
Displays the door panel software version.
version 5.00
Coming from previous page
Continue
Allows to set the lock release activation time.
Modify this value when the panel is placed
far from the door. The value is shown in
seconds and the factory default value is
3 seconds.
To change this value press : the display
will show the message
modify value
.
Key in the new activation time and confirm
by pressing .
If is pressed the former value will be
restored.
The lock release will not be activated if a null
value is introduced. To avoid lock release
overheating do not introduce a high value.
onfiguration menu.
C
End of the configuration menu. Use "UP" arrow key to move to the previous options.
Press to exit from the configuration menu and return to the main menu.
If is pressed twice the panel will exit from the programming menu.