Goldwing Corvus Racer 540 30CC, Руководство пользователя

Страница: 2 / 15

Unpacking
Carefully unpack the model making sure to cut any c
sharp knife . Inspect each item to make sure no transit damage has occurred . If you
are not happy with any part or are unsure , please contact the Dealer that you purchas
-ed from .
overing on the model if using a
Covering
Due to the model spe
some of the covering may have wrinkles . We highly recommend that you take time to
re - seal all covering edges with an iron and to use a heat gun to remove any wrinkles
and re - tighten the covering . It is best to do this now while the plane is not assembled.
nding time indifferent climates on its way from factory to you ,
Note :
Do not let any heat get near parts like the canopy or cowl as this may cause damage .
Assembly Tips
We also recommend that you go over all the major accessible joints with some C . A . glue .
Also wick thin C . A . glue into areas of high stress around the U / C plate and motor box .
Use a thread locker on all metal-to-metal joints . Even if you are using electric with low
vibration do not drop off your airplane ! levels it will make sure that things