Items required to complete this model:
26-38 cc gas engine with stock or aftermarket
exhaust system
Appropriate propeller for your engine
All the required engine and exhaust mounting
hardware
Ignition battery and switch
One quality throttle servo and appropriate
servo arm
3 high quality metal gear servos of 80 in-oz or
better for the ailerons and elevators
One high quality rudder servo of 160 in-oz or
better
Appropriate servo arms for the above
Servo wire extensions. Recommend KUZA
Twisted 22 AWG Servo Extensions (Not
included)
One 12”(305mm) No. KAG002522
Three to four 18”(455mm) No. KAG002523
Switches with charging jacks for the Rx
Rx batteries of significant capacity to power
your choice of servos.
Receiver of your choice
Required tools
Covering Iron and heat gun
Assortment normal hobby tools such as
screwdrivers, hobby knife, drill and drill bits,
pliers, etc.
Thick and thin CA adhesives
30 minute epoxy
Isopropyl alcohol
Ruler or tape measure
Blue thread-lock or equivalent
