All contents copyright 2014, GoldWing RC Version 2.0, Feb 2014
5. The EXTRA&SBACH is supplied with a high quality set of pull-pull cables and ball-links.
6. Install your rudder servo into the precut locations in the fuselage. Using a fine drill pre-drill the holes and
drop thin CA into the holes to strengthen the wood. You will need 3 inch arms on the servo. Set up your radio
accordingly and center the rudder servo.
7
．
We recommend using KUZA CNC servo arms (sold separately) for rudder control. 2PCS 3.25” Dual
arm,1PCS 4.75” Dual arm
8. The EXTRA&SBACH has the closed loop pre-installed and crimped at the rudder end. These can be
connected with the M3 bolt and nut. The wire will be left looped inside the fuselage and will need to be
connected to the servo arm.
