Goldwing RC SBACH342 120E, Руководство пользователя

Страница: 44 / 49

Ailerons 25 degrees 35-40 degrees
Final Assembly and Pre-Flight Inspections
1. Before arriving at your flying field, be sure all your batteries are properly charged and all radio systems are
in working order.
2. Install the wings onto the fuselage being careful to align the wing tube with the wings and not force it. The
wing tube may be initially tight but will loosen after some with use. Guide your servo wires into the fuselage
openings and connect to the correct aileron channels. Servo clips are recommended. Once you have the
wings fully seated in the fuselage tighten the wing bolts inside the fuselage.
3.Side force generators Assembly.
Cut the wing film needed to be install the SFG. To fix the SFG use M3x12 Hex bolts and self-locking nuts and
washers.