Goldwing RC MX2 50CC V4, Руководство пользователя

Страница: 47 / 49

All contents copyright 2014, GoldWing RC Version 2.0, Feb 2014
8. Check all control surfaces for secure hinges by performed a slight tug on the control surfaces and observing
if there is any give in the hinges. Check all control rods, ball links, servo screws, etc. for correct operation and
installation.
9. Check your batteries and perform a range check once again with the engine off and running. Be sure all
surfaces are moving in the correct direction and the correct amount for your flying setup.
10. You are now ready for your maiden flight! Good luck and enjoy your new aircraft! If you have any
comments or questions about this manual or the aircraft please email
service@goldwingrc.com .
Recommend Accessories
（
Not included
）：
* KUZA Heavy duty 7075 aluminum Servo Arm
For Futaba servo
（
25T
）：
47mm/1.75in Single No. KAG0S7F
100mm/4in Dual No. KAG0D723F
For Hitec servo
（
24T
）：
47mm/1.75in Single No. KAG0S7H
100mm/4in Dual No. KAG0D73H