Goldwing RC MX2 50CC V4, Руководство пользователя

Страница: 45 / 49

All contents copyright 2014, GoldWing RC Version 2.0, Feb 2014
4
．
Install the wings onto the fuselage being careful to align the wing tube with the wings and not force it. The
wing tube may be initially tight but will loosen after some with use. Guide your servo wires into the fuselage
openings and connect to the correct aileron channels. Servo clips are highly recommended. Once you have
the wings fully seated in the fuselage tighten the wing bolts inside the fuselage.
5
．
Side force generators assembly.
Cut the wing film needed to be install the SFG. Fixed the SFG Use M3X20 cap head bolts and washers and
balsa sheet.