Goldwing RC 91in EXTRA300LP50-60CC, Инструкция по эксплуатации

Страница: 39 / 49

As the EXTRA has a scale inlet, depending on your engine it may need to be removed. If it is still attached
it may be beneficial to strengthen with a small amount of glass cloth.

If your exhaust outlet comes out within the cowl area then use the same method.

Depending on the amount of cooling required for your engine a template for louvers in the bottom of
the cowl has been provided. Use a dremel tool to remove the material.

When the cowl clears the engine etc correctly the prop shaft of the engine will be in the centre of the
cowl.
3.The cowl is secured with four 3 X 16mm bolts and washers.
Apply nutlock onto the bolts as the vibration from the gas engine will shake them come loose.